<!--StartFragment-->* One piece bed, floor type casting.<br>* Alloy steel spindle with opposed taper roller bearings.<br>* All gears in the headstock are hardened and precisely ground.<br>* Automatic ranges of spindle speed through pneumatic gear shift.<br>* Spindle speed ranges are automatically changed by M code.<br>* Infinitely variable speed are commanded by S code.<br>* Tool change are commanded by T code.<br>* Auto lubrication system is equipped for headstock, carriage, and cross-slide.<br>* Precision tapered roller bearings are equipped on the spindle and the quill.<br>* The quill is heat treated and precisely ground.<br>* Internal taper of quill to suit MT#5 dead center or live centre.<br>* Turcite B anti friction material is applied on cross slide and carriage for reduce friction.<br>* X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.<br><br>BED<!--StartFragment--> <table><tbody><tr><td><br>Width</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">560 (22.04)</td></tr><tr><td colspan="6" rowspan="1">CARRIAGE</td></tr><tr><td>Width of cross slide</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">350 (17.77)</td></tr><tr><td colspan="6" rowspan="1">TURRET</td></tr><tr><td colspan="2" rowspan="1" ;="">Standard tool post</td><td colspan="4" rowspan="1" ;="">Auto 4-way / Polygon Disc / VDI disc</td></tr><tr><td colspan="2" rowspan="1" ;="">No. of tool stations</td><td colspan="4" rowspan="1" ;="">H4;H6 / V12 / V8;V12</td></tr><tr><td>Turning Tool Size</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">32 x 32 (1.25)</td></tr><tr><td>Boring Tool Size(max.)</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">63 (2.5)</td></tr><tr><td colspan="6" rowspan="1">TRAVEL</td></tr><tr><td>Cross slide(X axis) travel</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">630 (24.8)</td></tr><tr><td>Longitudinal(Z axis) travel</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">1500 (59.05), 2000 (78.74), 3000 (118.11),<br>4000 (157.48), 5000 (196.85), 6000 (236.22),<br>7000 (275.59), 8000 (314.96), 9000 (354.33),<br>10000 (393.70), 11000 (433.07), 12000 (472.44)</td></tr><tr><td>Cutting feed rate</td><td>mm(in.)/rev</td><td colspan="4" rowspan="1" ;="">X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75)</td></tr><tr><td>Rapid travel</td><td>M.(Ft.)/min</td><td colspan="4" rowspan="1" ;="">X axis : 6(19.68) ; Z axis : 6(19.68)</td></tr><tr><td>Ballscrew diameter</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">X axis : 50(1.96) ; Z axis : 80(3.14)</td></tr><tr><td colspan="6" rowspan="1">TAILSTOCK</td></tr><tr><td colspan="2" rowspan="1" ;="">Quill type</td><td colspan="4" rowspan="1" ;="">Built-in type, Dead tailstock quill</td></tr><tr><td>Quill diameter</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">145(5.7)</td></tr><tr><td>Quill travel</td><td>mm (in.)</td><td colspan="4" rowspan="1" ;="">200(7.87)</td></tr><tr><td colspan="2" rowspan="1" ;="">Internal taper of quill</td><td colspan="4" rowspan="1" ;="">MT#5</td></tr><tr><td colspan="6" rowspan="1">MOTOR</td></tr><tr><td colspan="2" rowspan="1" ;="">Headstock oil refrigerator</td><td colspan="4" rowspan="1" ;="">18,000BTU(4,500Kcal)</td></tr><tr><td>Main spindle</td><td>KW(HP)</td><td colspan="4" rowspan="1" ;="">30/37(40/50)-STD. ; 37.5/45(50/60)-OPT.</td></tr><tr><td>Axis servo</td><td>KW(HP)</td><td colspan="4" rowspan="1" ;="">X axis : 7(9.387) ; Z axis : 7(9.387)</td></tr><tr><td>Hydraulic tank</td><td>KW(HP)</td><td colspan="4" rowspan="1" ;="">3.7(5)</td></tr><tr><td>Coolant pump</td><td>KW(HP)</td><td colspan="4" rowspan="1" ;="">1.05(1.4)</td></tr><tr><td colspan="2" rowspan="1" ;="">Controller</td><td colspan="4" rowspan="1" ;="">FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.</td></tr></tbody></table> <p>Note :<br>(1) X and Z axes actual cutting diameter will change when equipped with different turrets.<br>(2) Specifications are subject to change without notice for improvement<!--EndFragment--><!--EndFragment--></p>