Cincinnati Monoset Tool & Cutter Grinder.
Grinders, Tool & Cutter
Capable of multiple grinding operations at a single chucking of the work-piece-saves setup time; assures excellent concentricity. MONASET maintains its versatility for generating straight or tapered, right or left-hand, infinitely variable leads from a simple built-in lead mechanism.
Turntable mounting of entire workhead slide assembly, adjustable through 235 plus degrees in the horizontal plane, has proven to be a real asset when grinding radii.
Workhead that is adjustable on separate main slide with dual handwheel control has proven to be a boon for setups. Offset slide for workhead spindle permits centerline of spindle to be offset from center of turntable-a necessity when grinding convex or concave radii with centerline outside the axis of workpiece.
And micrometer stop dogs and graduated dials which greatly simplify accurate positioning of workhead main slide, and wheelhead cross and longitudinal slides.
General Specifications from Cincinnati may differ from actual machine.
Capacity
Workhead:
Swing over main slide, max dia………………………….. 12″ (304mm)
Collet work dia, max……….. 1.25″ (31mm) min………. 0.12″ (3mm)
Lead generated by spiral lead mechanism, min………..1.81″ (45mm)
Length between spindle noseand tail center, max……..6″ (152mm)
Wheelhead
Grinding Wheel dia. max…………………………………….4″ (101mm)
Range
Workhead:
Main slide travel………………………………………………..5.75″ (146mm)
Offset slide travel, total……………………………………….5.25″ (133mm)
– front of center, 3″ (76mm)
– Rear of center, 2.25″ (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base)…………………………..235 degrees
Vertical plane,
– above center…………………………………………………40 degrees
– below center…………………………………………………40 degrees
Wheelhead:
Longitudinal slide travel………………………………………6″ (152mm)
Vertical slide travel, total…………………………………….9.50″ (241mm)
– above center, 4.50″ (114mm)
– below center, 5″ (127mm)
Cross slide travel, total………………………………………7.50″ (190mm)
– front of center, 3″ (76mm)
– Rear of center, 4.50″ (114mm)
Spindle Speeds
(±0%,-8% variation allowable)
Workhead, one speed………………………………………436 RPM
Wheelhead, three speeds………………………………….4000, 5729 and 8000 RPM
(motor speed @ 3600 rpm)
Internal Grinding Attachment (Extra Cost) three speeds ………..16410,23510, and 32820 (approx.)
Motors, Electric
Workhead drive, AC ……………. includes reverse 1/4 hp (.186 kilowatts)
Wheelhead drive, AC ………………………………….1/2 hp (.373 kilowatts)
Floor Space Weight
Area of base only…………………………………………………………………………25″ x 26″ (635mm X 660mm)
Area required for machine (including swivel and overtravel movements)………60″ X 67″ (1524mm X 1701mm)
Height from floor to center of workhead spindle …………………………………..47.72″ (1212mm)
Height, overall with wheelhead raised………………………………………………..62.12″ (1577mm)
Netweight (including motors and controls)………………………………………….1525 Ibs (691 kilograms)
Digital Read Out
Collets
Various tooling.
