Hollow Spindle Lathe CNC 14 inch HS 40 inch Swing x 3M (10 ft) centers Megabore

Images (7)
Overview
Type:
Lathes, Oil Field & Hollow Spindle
Manufacturer:
MEGABORE
Model:
LD-40
Condition:
New - In-Stock
Stock #:
LO1261
Status:
For Sale
Description

Megabore's biggest selling CNC The LD Model. Swing 1000 mm x 3000 between centers, x 14 inch Bore See stock photos. OUTSTANDING FEATURES * One piece bed, floor type casting. * Alloy steel spindle with opposed taper roller bearings. * All gears in the headstock are hardened and precisely ground. * Automatic ranges of spindle speed through pneumatic gear shift. * Spindle speed ranges are automatically changed by M code. * Infinitely variable speed are commanded by S code. * Tool change are commanded by T code. * Auto lubrication system is equipped for headstock, carriage, and cross-slide. * Precision tapered roller bearings are equipped on the spindle and the quill. * The quill is heat treated and precisely ground. * Internal taper of quill to suit MT#5 dead center or live centre. * Turcite B anti friction material is applied on cross slide and carriage for reduce friction. * X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.

Specifications
Swing40"
Centers3 m
Spindle Bore14"
Power40 hp
ControlCNC (Fanuc)

BED Width..........................................................mm (in.) 560 (22.04) CARRIAGE Width of cross slide...........................................mm (in.) 350 (17.77) TURRET Standard tool post............................Auto 4-way / Polygon Disc / VDI disc No. of tool stations..........................................H4;H6 / V12 / V8;V12 Turning Tool Size...........................................mm (in.) 32 x 32 (1.25) Boring Tool Size (max.)...........................................mm (in.) 63 (2.5) TRAVEL Cross slide (X axis) travel.....................................mm (in.) 630 (24.8) Longitudinal(Z axis) travel mm (in.) 1500 (59.05), 2000 (78.74), 3000 (118.11), 4000 (157.48), 5000 (196.85), 6000 (236.22), 7000 (275.59), 8000 (314.96), 9000 (354.33), 10000 (393.70), 11000 (433.07), 12000 (472.44) Cutting feed rate mm(in.)/rev X axis: 0.001~250(0.00004~9.84); Z axis: 0.001~400(0.00004~15.75) Rapid travel.........................M.(Ft.)/min X axis: 6(19.68); Z axis: 6(19.68) Ballscrew diameter......................mm (in.) X axis: 50(1.96); Z axis: 80(3.14) TAILSTOCK Quill type Built-in type, Dead tailstock quill Quill diameter....................................................mm (in.) 145(5.7) Quill travel.....................................................mm (in.) 200(7.87) Internal taper of quill.......................................................MT#5 MOTOR Headstock oil refrigerator....................................18,000BTU (4,500Kcal) Main spindle..........................KW(HP) 30/37(40/50)-STD.; 37.5/45(50/60)-OPT. Axis servo................................KW(HP) X axis: 7(9.387); Z axis: 7(9.387) Hydraulic tank........................................................KW(HP) 3.7(5) Coolant pump.......................................................KW(HP) 1.05(1.4) Controller FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT. Note : (1) X and Z axes actual cutting diameter will change when equipped with different turrets. (2) Specifications are subject to change without notice for improvement Hollow spindles available......................................6 inch to 22 inches.

Equipped With

STANDARD EQUIPMENT * Hydraulic turret. Check options supplied with this machine. * Dead tailstock quill with 145mm diameter. * Carriage driven tailstock body and manual quill movement. * FANUC 0i-TF series complete with manual guide and thread repair. * Rear chip conveyor.