Drills, Radial
Stock #: DR4923
Radial Drill Asquith heavy duty 8ft Arm Model OD2 50 mm Drilling capacity Speeds 31 - 836 RPM (Machine No 2)
Stock #: DR4924
Asquith Radial Drill OD2 8ft Arm Model OD2 75 mm Drilling capacity Speeds 42-1130 RPM Machine No 3
Portable Radial Drills
Stock #: DR4825
Asquith Portable Radial Drill. All angle head 1800 mm Arm. 4 Morse taper Spindle. 12 Speeds 22 - 500 RPM. Wheels. Levelling Jacks.
Stock #: DR4825A
Drill Pedestal
Stock #: DP9805
3 Morse Taper spindle. Maximum Drilling capacity 25mm. Spindle travel 110mm. Speeds 126 - 2870rpm. Table diameter 350mm. excellent condition.
Welding Positioners — Welding Equipment
Stock #: PW1168A
Slotters
Stock #: SL1794
Butler Slotter Stroke 520 mm Table Diameter 1140 mm Diameter if workpiece 1800 mm Max Stroke 21″ / 530mm Min Stroke 7 ½” / 190mm Number of Speeds 6 Cycles per minute 9/11/14/18/22/28 Dia. withou...
Lathe Chucks
Stock #: MC9644A
Lathes, Engine, Center
Stock #: LC9728
350mm swing x 1250mm between centres. Variable speeds up to 3250rpm. 42mm Bore. 3 & 4 jaw Camlock chucks. QCTP. Excellent.
Stock #: LC9668
390mm swing x 1250mm between centres. 54mm bore. Speeds 15 - 2500rpm. Variable. Digital readout. Taper turning. QCTP. Footbrake. 3 & 4 Jaw camlock chucks.
Precision Lathes
Stock #: LC9705
MODEL CTL-618EVS Turning Capacity With Chuck 150 mm (6") Spindle Nose Diameter 55.5 mm (2.189") Spindle Nose I.D/O.D 5C (10°) / 4° Taper Spindle Speeds (Variable) 50 - 4,000 rpm (5C) / 50-...
Shapers
Stock #: SH9756
28” Stroke Speeds 10 - 110 strokes/min. Powered feeds to table. Made in Japan. This machine would suit a small maintenance workshop, a good shaper can cover for anything a milling machine or a slot...
Plate Bending Rolls
Stock #: RO0017
Davmar Model D10100 Initial Pinch Hydraulic Plate Rolls. 3000mm x 40mm bending capacity. Rolling speed 0 - 20 ft/min 480mm diameter rolls, 50HP main motor. End Mounted Section Roll with Various Dies
Band Saw
Stock #: SM1165
Doall vertical Bandsaw. 18 inch throat.
Guillotines
Stock #: PG1122
Plate Guillotine. Manufactured by Dye. 12' x 16mm.
Stock #: DP1639
Erlo Pedestal Drill Drill capacity: 60 mm Drilling depth: 260 mm Throat: 400 mm 12 spindle speeds: 40-1065 Rpm Table dimension 600 x 600 mm
broaching machines and Keyseaters
Stock #: BX1122
with tooling
Stock #: DP9747
Belt drive. Speeds 180 - 1680rpm. 3 Morse Taper. 350mm x 350mm Table. 240V Single Phase.
Stock #: LC9677
Manufacturer Harrison Model M400 Diameter over bed (Max) 400mm Diameter over cross slide (Max) 254 Diameter in gap (max) 610 Length between centres (Max) 2000mm Diameter of hole through spindle 65m...
Horizontal & Vertical Ram Type Mills
Stock #: MV9809
Stock #: LC9770
650mm swing x 2000mm between centres. 410mm swing over cross slide Speeds 15 up to 750rpm. 60mm spindle Bore. Steady rests 200mm ID & 115mm ID Taper turning attachment. 3 & 4 jaw chucks M5 tap...
Stock #: LC9658
435mm swing x 1500mm between centres. Speeds 32 - 1800rpm. Spindle bore 52mm. 3 & 4 Jaw Chucks. steady rests. Foot brake.
Grinders, Surface, Reciprocating
Stock #: GS9731
150mm x 300mm magnetic chuck. Late model.
Mills, Vertical
Stock #: MV9783
1220mm x 250mm table Power feeds to long & cross Variable speed spindle, 60-4200rpm NT30 spindle taper 3-axis Sony DRO Coolant
Mills Vertical
Stock #: MV9808
PROTOTRAK NC controller. 1270MM X 305MM. ISO40 SPINDLE TAPER. 3 AXISA DRO TRAVELS: X = 865MM. Y = 406MM. Z = 406MM. SPEEDS 70 - 3600RPM. POWERED DRAWBAR. 5HP MAIN MOTOR.
Press Brake
Stock #: PB1050
Kleen 300 Ton Press Brake x 22 ft 6 ins Capacity. Just removed from workshop.
Machining Centers Vertical
The MV series traveling column machining centers are designed for the application of multi-function vertical milling & machining solutions. Table sizes range from MV-206 (2500 mm x 800 mm) to (8...
Stock #: DR4926
Portable Radial Drill, 5 Morse Taper. Power locking. Speeds to 750 RPM. Approx 3000 mm of longitudinal travel. With lifting shackle. Paintwork is not good but machine is in excellent condition.
Stock #: LC9754
Mazak Centre Lathe. 530mm swing x 3000mm between centres. Speeds 25 - 1500rpm. 80mm spindle bore. Fixed & traveling steady rests. Taper turning attachment.
Lathes, CNC
Stock #: LO8
The BN series of CNC Lathes offer large swing machine without the bulk of a 3 shear bed machine, We offer 3 different swing options. The series number is the approximate swing in inches. Bed Width ...