Swing Over Bed 510mm Distance Between Centres 1500mm Spindle Bore 80mm Speeds 25 - 1600rpm Swing In Gap 735mm Swing Over Cross-slide 305mm 3 & 4 Jaw chucks. Steady rest.

X - Travel 470 mm Y - Travel 171 mm Z - Travel 500 mm Table Length 450 mm Table Width 150 mm Table load 100 Kgs Grinding wheel dimensions 200mm x 34mm x 31.7mm Power 1,5 kW Wheel Speeds 2640 Rpm Co...

This machine was removed from an oilfield machine shop. The machine looks quite good but we do not know if it is operational. Hence the low price, about the value of the chuck.

28” Stroke Speeds 10 - 110 strokes/min. Powered feeds to table. Made in Japan. Very little use One of the best shapers we have seen. This machine would suit a small maintenance workshop, a good sha...

320mm stroke. 475mm rotary table. 400mm throat.

Mazak Centre Lathe. 530mm swing x 3000mm between centres. Speeds 25 - 1500rpm. 80mm spindle bore. Fixed & traveling steady rests. Taper turning attachment.

640mm swing x 4000mm between centres. 890mm swing over the gap. 370mm swing over the cross slide. 100mm bore. Speeds 12 - 1200rpm. 3 & 4 Jaw chucks. Steady rest.

1480mm swing x up to 2400mm between centres 125mm bore. Speeds 4.5 - 225rpm.

Swing over Bed (mm) 554 Distance Between Centres (mm) 3000 Spindle Bore (mm) 90 Spindle Nose No.5 MT Spindle Speeds (rpm) 18 - 1800 Variable in 3 ranges. Spindle Motor Power (kW) 11 Taper Turning A...

This machine was removed from an operating oil shop before closure. We are not sure of its operational status. Bed looks quite good. Selling for the value of the hydraulic chuck.

510mm swing x 2100mm between centres. 100mm bore. Speeds 16 to 1500rpm Swing over cross slide 330mm Steady rest fixed 210mm capacity. 6 off tool holders. Quick change toolpost. 2 off 3 jaw chucks...

Belt drive. Speeds 180 - 1680rpm. 3 Morse Taper. 350mm x 350mm Table. 240V Single Phase.

4 Morse taper spindle. Speeds 50 - 1800rpm. Powered feeds & elevation. Box table. Coolant.

Speeds 73 - 1065rpm. 3 Morse taper Wind up table.

150mm x 300mm magnetic chuck. Late model.

350mm swing x 1250mm between centres. Variable speeds up to 3250rpm. 42mm Bore. 3 & 4 jaw Camlock chucks. QCTP. Excellent.

Elevating Bridge

1275mm swing over the bed x 2000mm between centres. 155mm spindle bore. Powered Feeds & rapids in all directions. 2 Axis DRO. 1000mm diameter 4 jaw chuck.

Megabore PA40x4mx14" bore 1000mm swing x 4000mm between centers. 360mm (14") Bore. 30" All steel 4 Jaw chucks with 14" bore (2 off) Full-length hydraulic copy system Semi-auto threading system 1 x ...

2000 mm x 700 mm table. 50 Int taper. Spindle speeds 28-1800 RPM. Pendant Control. Ram type double swivel head. 3 Axis DRO. Serial Number 35744.

1350 mm x 310 mm Table. 800 mm Table Travel. 265 mm cross Travel. 400 mm Vertical Travel. Vertical Milling Head 50 taper. Horizontal Spindle Taper 50. Swivel Table 45 Degrees. Max weight on Table 2...

450mm x 150mm magnetic chuck.

MODEL CTL-618EVS Turning Capacity With Chuck 150 mm (6") With Expanding Collets 76 mm (3") With Round 5C Collets 27 mm (1-1/16") With Hexagon 5C Collets 22 mm (7/8") With Square 5C Collets 19 mm (3...

Webster & Bennett 48" VTL with elevating Bridge.

Stanko Lathe. Model 1A64. Spindle Chuck: 800mm - 4 Jaw Spindle Bore: 90mm Swing over Bed: 890mm Swing over Carriage: 560mm Length Between Center: 3000mm Bed Width: 780mm Spindle Speed: 7.1 - 750 rp...

800mm swing x 3000mm Between Centres, 110mm bore. Speeds up to 1250rpm. 400mm Diameter Chuck

800mm swing x 1500mm between centres. 110mm spindle bore. Speeds 10 - 1250rpm. Steady rest.