Equipment

Stock #: DR9816

Stock #: LC9813

700mm x 3000mm between centers. 105mm Bore. Speeds 10 - 1250rpm. 3 & 4 Jaw Chucks. Steady Rest. 2 Axis DRO.

Stock #: MV9809

Stock #: MV9808

PROTOTRAK NC controller. 1270MM X 305MM. ISO40 SPINDLE TAPER. 3 AXISA DRO TRAVELS: X = 865MM. Y = 406MM. Z = 406MM. SPEEDS 70 - 3600RPM. POWERED DRAWBAR. 5HP MAIN MOTOR.

Stock #: MC9806

Ratios: 1-1, 1-2, 1-6. Speeds 800 - 20,000 rpm. Collets.

Stock #: DP9805

3 Morse Taper spindle. Maximum Drilling capacity 25mm. Spindle travel 110mm. Speeds 126 - 2870rpm. Table diameter 350mm. excellent condition.

Stock #: MV9804

1270mm x 250mm table. NT40 spindle taper. Variable speed head. machine vice. rotary table. 3 Axis DRO. Excellent condition.

Stock #: GS9802

500mm x 250mm magnetic chuck. 330mm diameter wheel. Coolant tank.

Stock #: LC9801

460mm swing over bed x 2000mm between centers 740mm swing in the gap 80mm spindle bore Speeds to 1600RPM 3 & 4 Jaw camlock chucks Fixed & Traveling Steady rests Foot brake. Coolant

Stock #: LC9793

640mm swing x 2000mm between centers. Speeds 9 - 1600rpm. 80mm Spindle bore. 3 & 4 Jaw chucks. Faceplate. QCTP with holders. Fixed & traveling steady rests. Live center. Taper turning attachment. E...

Stock #: LC9792

900mm swing over bed x 3000mm between centers. 125mm bore. Speeds 2.8 to 560rpm. 3 & 4 jaw chucks. Excellent condition. Taper turning attachment. 4 way toolpost.

Stock #: MC9790

Stock #: PG9786

Model HG-2504. Front sheet supports. Rear eye guards. Motorised backrail.

Stock #: LC9784

TUDA TFL1600 HEAVY DUTY GAP BED LATHE (Japan) SWING OVER BED : 1200mm OVER GAP: 1600mm GAP LENGTH: 330mm DISTANCE BETWEEN CENTERS: 1750mm SWING OVER CROSS: 850mm SPINDLE SPEEDS: 5 TO 350 RPM MOTOR...

Stock #: MV9783

1220mm x 250mm table Power feeds to long & cross Variable speed spindle, 60-4200rpm NT30 spindle taper 3-axis Sony DRO Coolant

Stock #: MU9779

Stock #: LC9771

Modular type lathe. Centre Height can be raised with packing blocks. Distance from Chuck to Tailstock can be adjusted by rearranging floor plates. Swing over Bed 2200mm Chuck Diameter 2000 Distanc...

Stock #: LC9770

650mm swing x 2000mm between centres. 410mm swing over cross slide Speeds 15 up to 750rpm. 60mm spindle Bore. Steady rests 200mm ID & 115mm ID Taper turning attachment. 3 & 4 jaw chucks M5 tap...

Stock #: DR9759

1250mm arm. Speeds 32 - 1655rpm 6 Morse Taper. Powered feds. Box table. Coolant. Powered elevation of the arm.

Stock #: SH9756

28” Stroke Speeds 10 - 110 strokes/min. Powered feeds to table. Made in Japan. This machine would suit a small maintenance workshop, a good shaper can cover for anything a milling machine or a slot...

Stock #: LC9754

Mazak Centre Lathe. 530mm swing x 3000mm between centres. Speeds 25 - 1500rpm. 80mm spindle bore. Fixed & traveling steady rests. Taper turning attachment.

Stock #: LC9752

1480mm swing x up to 2400mm between centres 125mm bore. Speeds 4.5 - 225rpm.

Stock #: LC9748

510mm swing x 2100mm between centres. 100mm bore. Speeds 16 to 1500rpm Swing over cross slide 330mm 790mm swing over the gap. Steady rest fixed 210mm capacity. 6 off tool holders. Quick change to...

Stock #: DP9747

Belt drive. Speeds 180 - 1680rpm. 3 Morse Taper. 350mm x 350mm Table. 240V Single Phase.

Stock #: GS9731

150mm x 300mm magnetic chuck. Late model.

Stock #: LC9728

350mm swing x 1250mm between centres. Variable speeds up to 3250rpm. 42mm Bore. 3 & 4 jaw Camlock chucks. QCTP. Excellent.

Stock #: GS9708

450mm x 150mm magnetic chuck.

Stock #: LC9705

MODEL CTL-618EVS Turning Capacity With Chuck 150 mm (6") Spindle Nose Diameter 55.5 mm (2.189") Spindle Nose I.D/O.D 5C (10°) / 4° Taper Spindle Speeds (Variable) 50 - 4,000 rpm (5C) / 50-...

Stock #: BV9704

Webster & Bennett 48" VTL with elevating Bridge. Machine has some tooling. Most functions work however machine requires requires work. Spindle Speeds 4.5 to 100rpm. Feeds 0.005” to 0.250” per rev f...

Stock #: LC9703

Stanko Lathe. Model 1A64. Spindle Chuck: 800mm - 4 Jaw Spindle Bore: 90mm Swing over Bed: 890mm Swing over Carriage: 560mm Length Between Center: 3000mm Bed Width: 780mm Spindle Speed: 7.1 - 750 rp...