Asquith Radial Drill OD2 8ft Arm Model OD2 75 mm Drilling capacity Speeds 42-1130 RPM Machine No 3

Radial Drill Asquith heavy duty 8ft Arm Model OD2 50 mm Drilling capacity Speeds 31 - 836 RPM (Machine No 2)

Asquith Portable Radial Drill. All angle head 1800 mm Arm. 4 Morse taper Spindle. 12 Speeds 22 - 500 RPM. Wheels. Levelling Jacks.

Asquith Portable Radial Drill. All angle head 1800 mm Arm. 4 Morse taper Spindle. 12 Speeds 22 - 500 RPM. Wheels. Levelling Jacks.

Butler Slotter Stroke 520 mm Table Diameter 1140 mm Diameter if workpiece 1800 mm Max Stroke 21″ / 530mm Min Stroke 7 ½” / 190mm Number of Speeds 6 Cycles per minute 9/11/14/18/22/28 Dia. withou...

1500mm swing over the bed x 5000mm between centers. 1400mm diameter 4 jaw chuck. Speeds 3.5 - 350rpm. Steady rest. DRO.

350mm swing x 650mm between centres. 42mm bore. QCTP. Acurite DRO. Variable speeds up to 3250rpm. 3 & 4 Jaw camlock chucks. Prices are Plus GST

350mm swing x 1250mm between centres. Variable speeds up to 3250rpm. 42mm Bore. 3 & 4 jaw Camlock chucks. QCTP. Excellent.

Swing over Bed (mm) 554 Distance Between Centres (mm) 3000 Spindle Bore (mm) 90 Spindle Nose No.5 MT Spindle Speeds (rpm) 18 - 1800 Variable in 3 ranges. Spindle Motor Power (kW) 11 Taper Turning A...

390mm swing x 1250mm between centres. 54mm bore. Speeds 15 - 2500rpm. Variable. Digital readout. Taper turning. QCTP. Footbrake. 3 & 4 Jaw camlock chucks.

MODEL CTL-618EVS Turning Capacity With Chuck 150 mm (6") With Expanding Collets 76 mm (3") With Round 5C Collets 27 mm (1-1/16") With Hexagon 5C Collets 22 mm (7/8") With Square 5C Collets 19 mm (3...

28” Stroke Speeds 10 - 110 strokes/min. Powered feeds to table. Made in Japan. Very little use One of the best shapers we have seen. This machine would suit a small maintenance workshop, a good sha...

Davmar Model D10100 Initial Pinch Hydraulic Plate Rolls. 3000mm x 40mm bending capacity. Rolling speed 0 - 20 ft/min 480mm diameter rolls, 50HP main motor. End Mounted Section Roll with Various Dies

Doall vertical Bandsaw. 18 inch throat.

Plate Guillotine. Manufactured by Dye. 12' x 16mm.

ELB Schliff. Rotary, Horizontal Spindle, 1000 mm diameter chuck. Mechanically as new. Requires some electrical work.

Erlo Pedestal Drill Drill capacity: 60 mm Drilling depth: 260 mm Throat: 400 mm 12 spindle speeds: 40-1065 Rpm Table dimension 600 x 600 mm

with tooling

Gurutzpe Super BT 3000 x 800 (Spain). Year: 1987 Turning Length: 3000 mm Diameter over bed: 1650 mm, Diameter over cross slide: 1250 mm, Diameter above the gap: 1950 mm Gap width: 620 mm Spindle bo...

Swing Over Bed 510mm Distance Between Centres 1500mm Spindle Bore 80mm Speeds 25 - 1600rpm Swing In Gap 735mm Swing Over Cross-slide 305mm 3 & 4 Jaw chucks. Steady rest.

Belt drive. Speeds 180 - 1680rpm. 3 Morse Taper. 350mm x 350mm Table. 240V Single Phase.

Manufacturer Harrison Model M400 Diameter over bed (Max) 400mm Diameter over cross slide (Max) 254 Diameter in gap (max) 610 Length between centres (Max) 2000mm Diameter of hole through spindle 65m...

1350 mm x 310 mm Table. 800 mm Table Travel. 265 mm cross Travel. 400 mm Vertical Travel. Vertical Milling Head 50 taper. Horizontal Spindle Taper 50. Swivel Table 45 Degrees. Max weight on Table 2...

435mm swing x 1500mm between centres. Speeds 32 - 1800rpm. Spindle bore 52mm. 3 & 4 Jaw Chucks. steady rests. Foot brake.

X - Travel 470 mm Y - Travel 171 mm Z - Travel 500 mm Table Length 450 mm Table Width 150 mm Table load 100 Kgs Grinding wheel dimensions 200mm x 34mm x 31.7mm Power 1,5 kW Wheel Speeds 2640 Rpm Co...