MEGABORE BNC-80
Lathes, CNCSwing | 80" |
Turning Dia | 62" |
Machining Length | 314" |
# Axis | 2 |
Bar Capacity | 16" |
Power | 50 hp |
Tailstock | Yes |
Control | CNC (FANUC 0i-TF) |
Swing over bed....................................................2050 mm (80 inch)
Distance Between Centers.........................1599 mm (5 ft) to 12000 mm (40 ft)
Hollow spindles from.............................................7 inch to 32 inch
BED 2 Shear Width..............................................mm (in.) 920 (36.22)
CARRIAGE Width of cross slide..................................mm (in.) 500 (19.68)
TURRET Standard tool post.....................Auto 4-way / Polygon Disc / VDI disc
No. of tool stations..........................................H4;H6 / V12 / V8;V12
Turning Tool Size...........................................mm (in.) 32 x 32 (1.25)
Boring Tool Size (max.)...........................................mm (in.) 63 (2.5)
TRAVEL Cross slide (X axis) travel..............................mm (in.) 950 (37.4)
Longitudinal (Z axis) travel mm (in.)
1500 (59.05), 2000 (78.74), 3000 (118.11), 4000 (157.48), 5000 (196.85),
6000 (236.22), 7000 (275.59), 8000 (314.96), 9000 (354.33), 10000 (393.70),
11000 (433.07), 12000 (472.44)
Cutting feed rate
mm(in.)/rev X axis: 0.001~250(0.00004~9.84); Z axis : 0.001~400(0.00004~15.75)
Rapid travel........................M.(Ft.)/min X axis: 6(19.68); Z axis: 6(19.68)
Ballscrew diameter.....................mm (in.) X axis: 50(1.96); Z axis: 80(3.14)
TAILSTOCK Quill type Built-in type, Rotating tailstock quill
Quill diameter..................................................mm (in.) 235(9.25)
Quill travel....................................................mm (in.) 200(7.87)
Internal taper of quill......................................................MT#6
MOTOR
Headstock oil refrigerator....................................18,000BTU(4,500Kcal)
Main spindle.........................KW(HP) 30/37(40/50)-STD.; 37.5/45(50/60)-OPT.
Axis servo...............................KW(HP) X axis: 7(9.387); Z axis: 7(9.387)
Hydraulic tank.......................................................KW(HP) 3.7(5)
Coolant pump......................................................KW(HP) 1.05(1.4)
Controller FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different
turrets.
(2) Specifications are subject to change without notice for improvement
***** Hollow spindles available 7 inches to 32 inches ****
STANDARD EQUIPMENT
* Hydraulic H4 turret.
* Rotating tailstock quill with 235mm diameter.
* Motorized tailstock body and quill movement.
* FANUC 0i-TF series complete with manual guide and thread repair.
* Front and rear chip conveyor.
Swing | 80" |
Turning Dia | 62" |
Machining Length | 314" |
# Axis | 2 |
Bar Capacity | 16" |
Power | 50 hp |
Tailstock | Yes |
Control | CNC (FANUC 0i-TF) |
Swing over bed....................................................2050 mm (80 inch)
Distance Between Centers.........................1599 mm (5 ft) to 12000 mm (40 ft)
Hollow spindles from.............................................7 inch to 32 inch
BED 2 Shear Width..............................................mm (in.) 920 (36.22)
CARRIAGE Width of cross slide..................................mm (in.) 500 (19.68)
TURRET Standard tool post.....................Auto 4-way / Polygon Disc / VDI disc
No. of tool stations..........................................H4;H6 / V12 / V8;V12
Turning Tool Size...........................................mm (in.) 32 x 32 (1.25)
Boring Tool Size (max.)...........................................mm (in.) 63 (2.5)
TRAVEL Cross slide (X axis) travel..............................mm (in.) 950 (37.4)
Longitudinal (Z axis) travel mm (in.)
1500 (59.05), 2000 (78.74), 3000 (118.11), 4000 (157.48), 5000 (196.85),
6000 (236.22), 7000 (275.59), 8000 (314.96), 9000 (354.33), 10000 (393.70),
11000 (433.07), 12000 (472.44)
Cutting feed rate
mm(in.)/rev X axis: 0.001~250(0.00004~9.84); Z axis : 0.001~400(0.00004~15.75)
Rapid travel........................M.(Ft.)/min X axis: 6(19.68); Z axis: 6(19.68)
Ballscrew diameter.....................mm (in.) X axis: 50(1.96); Z axis: 80(3.14)
TAILSTOCK Quill type Built-in type, Rotating tailstock quill
Quill diameter..................................................mm (in.) 235(9.25)
Quill travel....................................................mm (in.) 200(7.87)
Internal taper of quill......................................................MT#6
MOTOR
Headstock oil refrigerator....................................18,000BTU(4,500Kcal)
Main spindle.........................KW(HP) 30/37(40/50)-STD.; 37.5/45(50/60)-OPT.
Axis servo...............................KW(HP) X axis: 7(9.387); Z axis: 7(9.387)
Hydraulic tank.......................................................KW(HP) 3.7(5)
Coolant pump......................................................KW(HP) 1.05(1.4)
Controller FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different
turrets.
(2) Specifications are subject to change without notice for improvement
***** Hollow spindles available 7 inches to 32 inches ****
STANDARD EQUIPMENT
* Hydraulic H4 turret.
* Rotating tailstock quill with 235mm diameter.
* Motorized tailstock body and quill movement.
* FANUC 0i-TF series complete with manual guide and thread repair.
* Front and rear chip conveyor.