Overview
Type:
Lathe, CNC Heavy Duty 3 Shear Bed
Manufacturer:
MEGABORE
Model:
CN-80
Condition:
New - Build-To-Order
Stock #:
LO13
Status:
For Sale
Description

The CN series CNC Lathe is an extremely versatile heavy duty lathe that can be configured to client's requirements. Swings from 50 to 80 inch center distances to 40 ft (12 Meters) hollow Spindles up to 32 Inches. 3 Sheer Bed * One piece bed, floor type casting. * Alloy steel spindle with opposed taper roller bearings. * All gears in the headstock are hardened and precisely ground. * Automatic ranges of spindle speed through pneumatic gear shift. * Spindle speed ranges are automatically changed by M code. * Infinitely variable speed are commanded by S code. * Tool change are commanded by T code. * Auto lubrication system is equipped for headstock, carriage, and cross-slide. * Precision tapered roller bearings are equipped on the spindle and the quill. * The quill is heat treated and precisely ground. * Internal taper of quill to suit MT#6 dead center or live centre. * Turcite B anti friction material is applied on cross slide and carriage for reduce friction. * X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.

Specifications
Swing80"
Machining Length30'
# Axis2
Chuck Size48"
Bar Capacity12"
Power60 hp
Turning Dia66"
TailstockYes
ControlCNC (Fanuc)

SWING over bed 50 to 80 inch. Hollow spindles up to 32 inch. BED - Lengths available up to 12 meters. Width................................mm (in.) 1100 (43.31) CARRIAGE Width of cross slide.................mm (in.) 600 (23.62) TURRET Standard tool post....................Auto 4-way / Polygon Disc / VDI disc No. of tool stations..................H4;H6 / V12 / V8;V12 Turning Tool Size.....................mm (in.) 32 x 32 (1.25) Boring Tool Size(max.)................mm (in.) 63 (2.5) TRAVEL Cross slide(X axis) travel............mm (in.) 700 (27.55) Longitudinal(Z axis) travel...........mm (in.) 3000 (118.11), 4000 (157.48), 5000 (196.85), 6000 (236.22),7000 (275.59), 8000 (314.96),9000 (354.33), 10000 (393.70), 11000 (433.07), 12000 (472.44) Cutting feed rate.....................mm(in.)/rev X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75) Rapid travel..........................M.(Ft.)/min X axis : 6(19.68) ; Z axis : 6(19.68) Ballscrew diameter....................mm (in.) X axis : 50(1.96) ; Z axis : 80(3.14) TAILSTOCK Quill type............................Built-in type, Rotating tailstock quill Quill diameter........................mm (in.) 235(9.25) Quill travel..........................mm (in.) 200(7.87) Internal taper of quill MT#6 MOTOR Headstock oil refrigerator............18,000BTU(4,500Kcal) Main spindle..........................KW(HP) 30/37(40/50)-STD. ; 37.5/45(50/60)-OPT. Axis servo............................KW(HP) X axis : 7(9.387) ; Z axis : 7(9.387) Hydraulic tank........................KW(HP) 3.7(5) Coolant pump..........................KW(HP) 1.05(1.4) Controller: FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.Note : (1) X and Z axes actual cutting diameter will change when equipped with different turrets. (2) Specifications are subject to change without notice for improvement

Equipped With

Standard Accessories * Hydraulic H4 turret. * Rotating tailstock quill with 235mm diameter. * Motorized tailstock body and quill movement. * FANUC 0i-TF series complete with manual guide and thread repair. * Front and rear chip conveyor.

CNC Lathe 80 inch swing, hollow spindles to 32 inch,

CNC Lathe 80 inch swing, hollow spindles to 32 inch,
Lathe, CNC Heavy Duty 3 Shear Bed