MEGABORE TURRET TYPE Lathes, Oil Field & Hollow Spindle | ESP Machinery Australia Pty Ltd
Overview
Type:
Lathes, Oil Field & Hollow Spindle
Manufacturer:
MEGABORE
Model:
TURRET TYPE
Condition:
New - Build-To-Order
Stock #:
LO5
Status:
For Sale
Description

* One piece bed, floor type casting. * 2 shear bed way with extra way supporting the apron. * All ways are hardened and ground. * Alloy steel spindle with opposed taper roller bearings. * Hardened and ground gears, shafts. * Electromagnetic spindle brake. * 18-speed geared headstock. * 6-way rapid traverse and power feed to top slide. * Totally enclosed universal inch / metric gear box. * Carriage position device. * Dual voltage spindle motor, 30 to 50 HP. * Pressurized one shot lube system for cross slide and carriage.

Specifications
Swing45"
Centers45"
Center OptionsUp to 236 inch
Spindle Bore7"
Spindle Bore Options8" 9" 10" 12" 14" 16"
Power0 hp

TURRET series............................................1A, 2A, 3A, 4A, 5A, 6A, 7A Spindle nose ASA................................................A2-15, A2-20, A2-28 Spindle bore.....mm (in.) 179(7), 205(8), 235(9), 255(10), 318(12), 360(14), 410(16) Swing over bed................................................mm (in.) 1,165 (45.86) Swing over cross slide..........................................mm (in.) 840 (33.07) Dist. between centers mm(in.) 3000(118.11), 4000(157.48), 5000(196.85), 6000(236.22) Spindle motor......................................Standard-30HP; Option-40HP, 50HP CAPACITY Centre height...................................................mm (in.) 590 (23.22) Swing over bed.................................................mm (in.) 1165 (45.86) Swing over cross slide..........................................mm (in.) 840 (33.07) Dist. between centres mm(in.) 3000(118.11), 4000(157.48), 5000(196.85), 6000(236.22) BED Width (W/O auxiliary guide).....................................mm (in.) 715 (28.14) Width (W auxiliary guide).......................................mm (in.) 800 (31.49) CARRIAGE (LEFT HAD SIDE) Cross slide travel.....................mm (in.) 800 (31.49) Tower turret travel..................................................mm (in.) Fixed. Compound tool post travel.......................................mm (in.) 500 (19.68) CARRIAGE (RIGHT HAD SIDE) Cross slide travel....................mm (in.) 800 (31.49) Hydraulic turret travel..............................................mm (in.) Fixed. THREAD FEED RANGE Longitudinal feed............................mm/rev (in.rev) 0.045~2.55 (0.0018~0.1) Cross feed mm/rev..................................(in.rev) 0.023~1.28 (0.0009~0.05) Longitudinal rapid feed.................................mm/rev (in.rev) 2000 (78.74) Cross rapid feed........................................mm/min (in/min) 1270 (50.00) Metric thread mm...................................................(kinds) 1~56 (60) Inch thread TPI..................................................(kinds) 1/2~28 (60) Module thread MOD...............................................(kinds) 0.25~14 (60) Diametral pitch thread DP.........................................(kinds) 2~112 (60) Pitch of leadscrew...................................................mm (TPI) 12 (2) MOTOR Main spindle motor..........................KW (HP) 22(30)-STD. 29(40) / 37(50)-OPT. Coolant pump motor...............................................KW (HP) 0.1 (0.125) Note: (1) X and Z axes actual cutting diameter will change when equipped with different turrets. (2) Specifications are subject to change without notice for improvement OUTSTANDING FEATURES * One piece bed, floor type casting. * 2 shear bed way with extra way supporting the apron. * All ways are hardened and ground. * Alloy steel spindle with opposed taper roller bearings. * Hardened and ground gears, shafts. * Electromagnetic spindle brake. * 18-speed geared headstock. * 6-way rapid traverse and power feed to top slide. * Totally enclosed universal inch / metric gear box. * Carriage position device. * Dual voltage spindle motor, 30 to 50 HP. * Pressurized one shot lube system for cross slide and carriage. Standard Accessories Specification Video

Please request a spec check if relying on a particular item.

Equipped With

Chucks front and rear Steadies as quoted.

Megabore Turret type Hollow Spindle Lathe
Lathes, Oil Field & Hollow Spindle