The LD series CNC Lathes offer a medium duty Lathe that is versatile and cost effective. The LD series is the most popular among our clients. Outstanding features. * One piece bed, floor type casting. * Alloy steel spindle with opposed taper roller bearings. * All gears in the headstock are hardened and precisely ground. * Automatic ranges of spindle speed through pneumatic gear shift. * Spindle speed ranges are automatically changed by M code. * Infinitely variable speed are commanded by S code. * Tool change are commanded by T code. * Auto lubrication system is equipped for headstock, carriage, and cross-slide. * Precision tapered roller bearings are equipped on the spindle and the quill. * The quill is heat treated and precisely ground. * Internal taper of quill to suit MT#5 dead center or live centre. * Turcite B anti friction material is applied on cross slide and carriage for reduce friction. * X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
Fanuc 0iTF CNC Control with Manual Guide I Function. Two Door Type Full Length Splash Guard 1 set 4 jaw independent chuck 32” diameter 2 off Rear Chuck adaptor 1 off Headstock Oil Cooler (18,000 BTU) 1 set Cabinet Refrigerator 1 set Flush Coolant Water System 1 set Auto Lubrication System 1 set 1 x Fixed steady rest (50 to 400mm) 1 set 1 x Fixed steady rest (350 to 700mm) 1 set Programmable Heavy duty tailstock with 235mm Quill 1 set Swarf Conveyor & bin 1 set Cross slide mounted Boring bar holder (6” Capacity) 1 off CF-AXIS Cf-Axis Position Accuracy +/-12” Cf-Axis Repeatability 12” Cf-Axis Servo Motor Fanuc Alpha30 (9.5hp) Cf-Axis Spindle with Hydraulic Brake Unit Cf-Axis Heidenhain Circular Scale Feed Back V12 Baruffaldi TBYA200 Turret with VDI40 Y-Axis Travel +/- 75mm Y-Axis with Hydraulic Counter Balance System
Spindle Bore: 255mm Spindle Nose: A2-15 Spindle Rpm: 10~500 rpm Spindle Speed Steps: 4 steps Swing Over Bed: 1275mm Swing Over Carriage: 900mm Cross Slide X Travel: 610mm Distance between Centre: 6000mm Z-Axis Ball Screw Diameter: 80mm 235mm Tailstock Quill with MT#6 Minimum Program Command: 0.001mm X axis Position Accuracy: 0.015mm Z axis Position Accuracy: 0.025mm Repeatability: 0.01mm Back Edit Function X-Axis Servo Motor Alpha30 Y-Axis Servo Motor Alpha30 with ABS Z-Axis Servo Motor Alpha30 with ABS Main Spindle Motor 40/50HP (Alpha 30)